2019 Ktm 500 Exc-F Stabilizer Kit

More Stabilizer Kit Options!

SUB Mount /Complete Stabilizer Kit /Rubber type /using stock triple clamps  
(P/N: DS-SUB-5925-02R)

*** Optional Accessories ***
Cable Guide SUB Universal (fits left or right side) - The cable guide is optional (not mandatory) but helps keep your cables routed properly and out of harms way. Please check the box at right if you want one added to your order. $21.95
Damper Manual - Mounting Instructions - Mounting Instructions

DS-5630-01RThis kit is designed to be used with the stock triple clamp and oversize handlebars. The Rubber SUB mount shown here in black, bolts to the stock triple clamp and converts your solid mounted triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. MED and SOFT compound bushings are provided. The SUB mount locates the bars between the #2 and #3 positions. Step by step pictured instructions are included along with all the necessary hardware. Standard diameter bars can be used in some cases but would require our Bar Reducers which are available here, on line, as an option, if needed. The cable guide and large knob in this photo are optional and not part of the basic kit.

"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.
Other Items for your bike!

Twin Air Filter KTM
From : $30.95

PBI Front Sprockets
From : $21.95

Triple Clamp - Scotts
From : $250.00

From : $149.95

Oil Filters
From : $69.95

Triple Clamp - Scotts
From : $297.00

EBC Sintered Rear Pad
From : $36.95