Stabilizer kit complete — This shows the Ktm weld-on kit which requires a small weld on the vertical tower to the frame. The welding procedure is very simple for a qualified welder. This also shows the std diameter bars which require a minimum of 40mm clearance between the main bar and crossbar in order for the stabilizer to physically fit. The stabilizer on this model is mounted in the reversed position when using a crossbar. Each kit includes all necessary hardware, step by step detailed instructions and the Owner's Manual. Stabilizer kit complete — This shows the Ktm weld-on complete kit and the oversize handlebar conversion available from Scotts. The weld on kit requires 2 small welds on eash side of the vertical tower to the frame, a relatively easy operation for a qualified welder.
