Stabilizer kit complete — Shown here is a photo of the bolt-on kit complete. Most models with standard diameter bars stock will require bars with a higher crossbar in order for the damper to physically fit in between the main bar and crossbar. Scotts offers a full selection of bars, should you need them. The bars in this picture are Renthal brand that come with a Bowed cross bar for more clearance. Each kit includes all the necessary hardware and step by step pictured instructions along with an Owners Manual. The bikes handling is enhanced considerably from the addition of the stabilizer. Comes with 3 fully adjustable circuits and is the only stabilizer with a high speed valve.Stabilizer kit complete — This photo shows our bolt-on stabilizer kit mounted with our Billet Triple Clamp and using Oversized handlebars. We make this kit for the stock triple clamps also, see other photos. Each kit includes all the hardware you need and step by step pictured instructions and Owner's Manaul. The bars are available online here at Scotts as an option. This kit slides right on and enhances the bikes performance considerably. Comes with 3 fully adjustable circuits and is the only stabilizer with a high speed valve. Stabilizer kit complete — This shows the bolt-on kit with standard diameter bars using a bowed cross bar, available from Scotts. Std diameter bars require a minimum of 40mm clearance between the main bar and crossbar in order for the stabilizer to physically fit.
