Stabilizer kit complete — Shown here is the complete kit for the ZRX1100 which requires a small weld where the frame bracket mounts to the frame in front of the tank. This is one of the few models that requires welding. Due to the steep head angle of this bike, the gain from the stabilizer is immense. The welding consists of 2 small welds approximately 1/2" in length at each end of the frame bracket easily performed by an experienced welder in a few minutes. Complete step by step instructions are provided with pictures and as you can see the final installation has a very nice look.Stabilizer kit complete — This photo shows the stabilizer mounted in the reverse position in order to clear the stock key. It can be mounted forward with very minor key mods. This requires a small weld where the frame bracket mounts to the frame in front of the tank. This is one of the few models that requires welding. Due to the steep head angle of this bike, the gain from the stabilizer is immense. The welding consists of 2 small welds approximately 1/2" in length at each end of the frame bracket easily performed by an experienced welder in a few minutes. Complete step by step instructions are provided with pictures and as you can see the final installation has a very nice look.
