2014 Ktm 250 XcF / 4stroke JD Jetting Kits Options

JD Jetting Kits   - Part No: JDK008 $84.95
 
JD Jetting Kits   - Part No: jdktx03 $209.95
JDKTX03 - Dyno and field tested, the Power Surge 6X will allow correction for humidity, temperature, air pressure, along with race fuels and motor modifications. The tuner adjusts in a matter of seconds in 6 zones, including an accelerator pump feature for more throttle snap response. The tuner can add or subtract fuel from the injection system. Conditions like rich or lean running, and stalling from flame-out at low revs can be corrected. The Power Surge 6X stays mounted on the motorcycle or quad and is easy to understand and adjust. The Power Surge 6X is a next generation performance tuning product for modern EFI systems. JDJetting\'s testing and research will provide the performance you need. JDJetting Power Surge 6X fuel injection tuner: -Increase power -Improve throttle response -6 levels of fuel injection tuning -Adjustable accelerator pump surge circuit -Easy to adjust at the track or off road -Tuning logic similar to a carburetor -Installs in minutes -Recommended settings included
 

JDKTX03 - Dyno and field tested, the Power Surge 6X will allow correction for humidity, temperature, air pressure, along with race fuels and motor modifications. The tuner adjusts in a matter of seconds in 6 zones, including an accelerator pump feature for more throttle snap response. The tuner can add or subtract fuel from the injection system. Conditions like rich or lean running, and stalling from flame-out at low revs can be corrected. The Power Surge 6X stays mounted on the motorcycle or quad and is easy to understand and adjust. The Power Surge 6X is a next generation performance tuning product for modern EFI systems. JDJetting\'s testing and research will provide the performance you need. JDJetting Power Surge 6X fuel injection tuner: -Increase power -Improve throttle response -6 levels of fuel injection tuning -Adjustable accelerator pump surge circuit -Easy to adjust at the track or off road -Tuning logic similar to a carburetor -Installs in minutes -Recommended settings included


James Dean designed the JDJetting kits so that you don't have to be an expert to get professional high performance results!! Even better, technical support is provided. The James Dean custom jetting kit is designed to improve throttle response throughout the range by using specially made multi-taper needles. These are based on the most popular settings used by new generation MX and off-road riders around the globe and the results are impressive. Exceeds the performance of standard 2-stroke and 4-stroke jetting, and other factory needle options. Low and High altitude custom designed triple taper needles. Main jets included. Spare needle clip. Dyno tested. Developed and tested from sea level to 12,000 ft elevation. You can't buy this level of performance from the OEM factory or other aftermarket suppliers. JD's testing and research will provide the performance you need.
Other Items for your bike!

ZETA Pivot Clutch Lever
From : $53.95

Enduro Engineering Comfort Tall Height Soft Seat
From : $139.95

Trailtech Voyager GPS
From : $279.95

Enduro Engineering Comfort Std Height Seat
From : $129.95

Renthal Rear Sprocket
From : $59.95

Enduro Engineering Comfort Std Height Soft Seat
From : $139.95

Bar Clamp only with Integral Handguard Mounts
From : $194.00

Triple Clamp kit with Stabilizer (Bolt-on kit)
From : $714.00

Top Mount / Stabilizer Kit Complete / Rubber type / with Integral Handguard
From : $774.00

Radiator Guards and Braces KTM
From : $94.95

Rubber Dampening System- KTM/Husky/Husaberg
From : $173.00

Skid Plate
From : $110.00

SUB Mount / Complete Stabilizer Kit Solid / when using stock triple clamps
From : $544.00

Triple Clamp - Scotts
From : $297.00

Top Mount / Mount Kit Only / Rubber type with Integral hand guard mounts
From : $414.00

Triple Clamp - Scotts
From : $250.00

Frame Bracket only (Bolt-on Top mount)
From : $104.00

Enduro Engineering Comfort Tall Firm Seat
From : $139.95

PBI Front Sprockets
From : $21.95

SUB Mount / Mount Kit Only / rubber type / using stock triple clamps
From : $314.00

SUB Mount / Complete Stabilizer Kit / with Triple Clamp
From : $761.00

Chain Guide - TM Designs
From : $105.00

Fuel Mixture Screw
From : $19.95

PBI Rear Sprocket
From : $57.00

Twin Air Filter KTM
From : $35.95

Top Mount / Stabilizer Kit with Integral handguard mounts
From : $644.00

Top Mount / Stabilizer Kit Complete / solid type
From : $529.00

Top Mount / Mount Kit Only / Rubber type
From : $304.00

EBC Sintered Rear Pad
From : $38.95

Frame Bracket only (Bolt-on-Sub mount)
From : $104.00

EBC Carbon X Rear Brake Pad
From : $34.95

Top Mount / Mount Kit Only
From : $169.00

SUB Mount /Complete Stabilizer Kit /Rubber type /using stock triple clamps
From : $674.00

Top Mount / Mount Kit Only / with Integral handguard mount
From : $284.00

SUB Mount / Mount Kit Only Solid / when using stock triple clamps
From : $184.00

Top Mount / Stabilizer Kit Complete / Rubber type
From : $664.00

JD Jetting Kits
From : $84.95

EBC Carbon X Front Brake Pad
From : $34.95

JD Jetting Kits
From : $209.95

Sharkfin
From : $149.95

ZETA Pivot Brake Lever
From : $53.95

EBC Sintered Front Brake Pad
From : $36.95

Oil Filters
From : $80.00