Scotts Performance Products

2017 Ktm 85 Sx Triple Clamp - Scotts Options

Triple Clamp - Scotts - Part No: TCD-9241R-SUB	$285.00
2003-2012 KTM 85's and all 105's come with 7/8"bars. This triple clamp is designed for oversize bars. If 7/8" bars are going to be used, select the box below to accept bar reducer bushings.

* Optional Accessories *
Handlebar mounting Cones (aluminum) - By checking the box at the right, you will receive a set of solid bar mount cones in addition to the rubber ones in the triple clamp. (Photo is showing red cones for the purpose of contrast, actual cones are black).	$12.00
Bar Reducers (Black in color) - 2003-2012 KTM 85's and all 105's come with 7/8"bars. This triple clamp is designed for oversize bars. If 7/8" bars are going to used, select the box to accept bar reducer bushings.	$38.00

Triple Clamp - Part No: TCD-9241R	$250.00
2003-2012 KTM 85's and all 105's come with 7/8"bars. This triple clamp is designed for oversize bars. If 7/8" bars are going to be used, select the box below to accept bar reducer bushings. *The stock 7/8" bars on these models are to low and do not allow the damper to fit under the cross bar. An alternate bend would be required. The best option is to use oversize bars

* Optional Accessories *
Handlebar mounting Cones (aluminum) - By checking the box at the right, you will receive a set of solid bar mount cones in addition to the rubber ones in the triple clamp. (Photo is showing red cones for the purpose of contrast, actual cones are black).	$12.00
Bar Reducers (Black in color) - 2003-2012 KTM 85's and all 105's come with 7/8"bars. This triple clamp is designed for oversize bars. If 7/8" bars are going to used, select the box to accept bar reducer bushings.	$38.00

2003-2012 KTM 85's and all 105's come with 7/8"bars. This triple clamp is designed for oversize bars. If 7/8" bars are going to be used, select the box below to accept bar reducer bushings. *The stock 7/8" bars on these models are to low and do not allow the damper to fit under the cross bar. An alternate bend would be required. The best option is to use oversize bars

Scotts/BRP Triple Clamps were given the highest rating of 5 stars in BOTH the Dirt Rider and Motocross Action "Triple Clamp Shoot Outs". These are machined from a 6061 billet block of aluminum and then anodized, to give your model that "Factory bike" look, while increasing performance in strength, stability, steering and add clamping surface. Some off-road bikes have such large, awkward triple clamps, that stabilizer installation and fuel tank options have become very difficult. The Scotts triple clamps are machined to be very attractive and extremely functional, eliminating the majority of problems associated with many after market triple clamps. We also make some triple clamps exclusively that cannot be found anywhere else but at Scotts. These are designed to use 1 1/8" (28mm) oversize handlebars, but can be converted back to standard 7/8" (22mm) diameter bars by using our optional bar-reducers. Use the product index and select �Handlebars� for a full menu of bar selections. The Photo you are looking at is a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike. The bars in the picture are not included in the kit. Our Triple clamps include the handlebar mounting brackets for the stabilizer (unless you prefer otherwise) and the lower mounting perches. Supercross style barclamps are also available, which can be specified in the comments of your order form.

If you are looking for the Triple Clamp Kit (with the Scotts Stabilizer and ProTaper bars) Click Here!