*The crossbar on the stock 7/8" bars on the "L" and "RL" is low and will interfere with damper mounting in most cases. The crossbar can be bowed slightly to gain clearance. Other options are to purchase a different bend of 7/8" bars or convert to oversize bars. We offer a kit with oversize bar mounts included here on our website. The part number is DS-6764-OS. We also offer a large selection of oversize bars to complete your kit. Some "X" models may encounter the same clearance issues. **NEVER RIDE THE MOTORCYCLE WITH THE CROSSBAR REMOVED FROM ANY 7/8" HANDLE BARS. INNURY OR DEATH MAY OCCUR. Our mounting is compatible with the IMS fuel tank for this model.

---

The bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame backet, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. If you have any questions regarding any installation guidelines or special applications, please give us a call. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.